More Views

Vector Electrolysis Permanent Hair Removal System

Out of stock

Be the first to review this product

CA$219.95

Quick Overview:

Vector Hair Removal System is a professional electrolysis machine with foot switch operation that can be used at home to permanently remove unwanted hair.

Details

Vector Permanent Hair Removal System – The most respected name in Electrolysis

The amazing Vector system is the only product of its kind that allows you to perform professional electrolysis at home. It removes one hair at a time with the included galvanic tweezers. Vector system permanently removes even the coarsest hair.

Vector – The most respected name in Electrolysis Hair Removal.

Vector Hair Removal System is the only epilator on the consumer market that permanently removes unwanted hair. It is a professional electrolysis machine with foot switch operation that can be used at home. The set Includes:

  • Vector™ Professional Electrolysis Machine
  • Foot Pedal
  • Insulated Galvanic Tweezers
  • 8 Electrode Patches
  • 60 g Tube of Conductivity Gel
  • Patch and Tweezer Cords
  • Quick Setup Guide
  • Dual voltage, can be used on 110V or a 220V outlet
  • One year manufacturer's warranty.

The Vector™ Hair Removal System has been designed for use in professional salons or for high-performance hair removal at home. It is the only hair removal system on the market that has the same output power as professional electrolysis machines. This machine will save you hundreds of dollars on electrolysis sessions that you can now perform in the privacy of your home.

Unlike other hair removal devices that use radio frequencies and batteries, the Vector™ uses the process of electrolysis to dissolve the hair follicle by producing sodium hydroxide in the hair shaft.

The Vector hair removal system is powered by AC instead of batteries for maximum power output. The Vector™ System removes one hair at a time with the included galvanic tweezers. The Vector™ permanently removes even the coarsest hair. Hair that is treated by the Vector system is permanently destroyed.

Features

  • Uses the process of electrolysis to permanently remove hair
  • Get the same results as professional electrolysis but in the privacy of your own home, and without paying up to $100 per hour for electrolysis sessions.
  • Offers the same results as professional electrolysis without the use of a needle.
  • The hair that was treated is permanently removed.
  • Very easy to use, simply grasp the hair with the tweezers and after a few seconds a chemical reaction occurs in the hair shaft and causes the hair follicle to dissolve and loose it ability to grow hair. 

Vector Electrolysis Hair Removal System

How Vector Electrolysis System Works

1. An electrode patch is placed anywhere on the body (this patch is used instead of the metal rod used during conventional electrolysis for better comfort during treatment). This patch is then connected to the ground wire and plugged into the Vector. The second wire is plugged into the tweezers.

2. The supplied conductivity gel is coated over the hair (the conductivity gel allows hair above the surface of the skin to conduct electricity, without the conductivity gel the hair has a very high resistance and will not conduct electricity even at lethal voltages) and that hair is then grasped with the tweezers as close as possible to the skin without actually touching the skin.

3. The current will flow from the tweezers down into the hair follicle, causing the watery environment inside the hair follicle to react with salt, resulting in Sodium Hydroxide. If you were to put just a drop of sodium hydroxide on your skin it will burn a hole right through. This chemical process is what dissolves the hair follicle and therefore the hair will never grow again.

WARNING:  
 
Hair removal achieved by the Vector System is irreversible. Please plan carefully the areas that are to be removed.
 
- Please read the user's manual carefully before attempting to use this device. 
- Do not attempt to exceed the appropriate power level: Excessive power applied to any area being treated may result in burns, scabbing, scarring, and other types of permanent skin damage. Please determine safe power levels for your application. 
- Keep this device and all of its accessories away from children. Any individuals under 18 years of age must use this device under adult supervision. 
- As with most electrical appliances this device contains "live" electrical parts when plugged in.

To reduce the risk of death by electric shock:

  1. Always unplug this device after use. 
  2. Do not use or store this device where it can fall or can be pulled in to a tub, toilet, or sink. 
  3. Do not use while bathing. 
  4. Do not use near or place in water.

Vector Hair Removal System FAQ

Question:
How to test if my Vector System is working?

ANSWER:

Please follow these steps:

1. Plug the machine into the AC receptacle using the supplied power cord.
2. Make sure that the ON/OFF switch is in the ON position.
3. Plug the tweezer cord and the patch cord into to their color coded outlets.
4. Touch the exposed metal parts of the tweezer to the aligator clip at the end of the patch cord.

The needle should then jump all the way to the right. If you purchased a foot pedal and have it plugged in during the test, you will need to touch the exposed metal parts while pressing down on the foot pedal. The machine is fully functional if the needle jumps to the right.

--------------------------------------------------------------------------------

Question:
Is the system easy to use?

ANSWER:

Initially the electrolysis treatment might seem somewhat difficult and time consuming, but within time you will gain practice being able to perform the treatment very quickly while obtaining the best results in permanent hair removal.

In the first times when trying to operate the Vector system we recommend covering a small area of the skin (making sure that both hair and skin are completely covered by the gel), such as the size of a quarter of a dollar, with the conductivity gel so that it won’t dry out during the process.

It is also very important that you remember to position the tweezers as close as possible to the skin, but without actually touching it in order to avoid possible skin damage or burns.

Since hair itself is an insulator and can not conduct electricity the conductivity gel must be applied in order to have electricity being conducted all the way down to the hair shaft. The electricity once conducted to the hair shaft will produce a chemical reaction that will permanently damage the follicle.

--------------------------------------------------------------------------------

Question:
After applying the current to the hair, do you need to pluck the hair, or just leave the hair and it will fall off?

ANSWER:

The treatment is more efficient if the hair is immediately plucked out after current is applied for the indicated amount of time.

--------------------------------------------------------------------------------

Question:
Is the treatment painful?

ANSWER:
There will be a tingling sensation during treatment, but most people tolerate it well. There are different power settings for different levels of comfort. However, there should be some tingling sensation for successful results.


--------------------------------------------------------------------------------

Question:
How long does it take to see results?

ANSWER:
Electrolysis permanently destroys hair. However, even after you completely clear an area in one treatment you will see some re-growth. The new growth that you see is not the same hair that you treated originally but fresh anagen hairs, which were resting at the time of the original treatment. Human hair grows in cycles and therefore not all hair is growing at once. If hair was not growing in cycles then humans would look like apes. It usually takes 3 to 4 months for all hairs to go through a complete growth cycle and all hairs will need to be electrolyzed before they stop their cycle. After each treatment you will notice about a 20% reduction in hair growth in the treatment area. This reduction is permanent and will compound until there is no more hair growth in the treatment area.

--------------------------------------------------------------------------------

Question:
What would be considered permanent hair removal?

ANSWER:
Permanent hair removal can not be completed in a single treatment of the area. Because hair grows in cycles you will have about a 20% reduction in hair growth. As the hair goes through all its cycles there will be no more hair growth.


--------------------------------------------------------------------------------

Question:
Is this procedure going to irritate my skin?

ANSWER:
There might be little red spots appearing around the treated area but they are only temporary, so do not be alarmed. You should consider that an indication of successful treatment since there are high levels of sodium hydroxide in the hair shaft.


--------------------------------------------------------------------------------

Question:
What is the purpose of the patch electrodes? Does this provide a faster alternative to the tweezers?

ANSWER:
The tweezers are the main treating article and what you would use as holding the hair for the time indicated in the manual. The electrode patch is designed to act strictly as the ground wire for the device - it should be placed anywhere on your body.


--------------------------------------------------------------------------------

Question:
If it takes a few hair cycles to achieve permanent removal how can I be certain that the procedure is working for me?


ANSWER:
If you are interested in testing the effectiveness of the Vector System, we suggest selecting a small treatment area such as eyebrows. This area has accelerated cycles and will be much easier to monitor for successful treatment then a large area such as your legs or chest.


--------------------------------------------------------------------------------

Question:
I am a man with dark leg hair. Will the Vector work for me?


ANSWER:
Yes. Vector is far from another non-functional, battery-operated device on the market. It is a full AC powered electrolysis unit that works just as well as ones in the salon. The Vector system does work on individual hairs and therefore a large area such as your legs will take a lengthy amount of time to treat. But keep in mind that once treated, the hair will never return. Unfortunately there are no miracles in the hair removal business and anyone trying to advertise one to you is either uneducated or lying for the sale.


--------------------------------------------------------------------------------

Question:
How long do the gel and the patches that are included with the machine last?


ANSWER:
Depending on the area of treatment, the gel will usually last a month to a month and a half of daily treatment. The patches can be reused until the adhesive is not sticking to the skin.


--------------------------------------------------------------------------------

Question:
Is the Vector Safe?

ANSWER:
If you are interested in testing the effectiveness of the Vector System, we suggest selecting a small treatment area such as eyebrows. This area has accelerated cycles and will be much easier to monitor for successful treatment then a large area such as your legs or chest.

--------------------------------------------------------------------------------

Please try the following to test if your Vector System is working:

1. Plug the machine into the AC receptacle using the supplied power cord.
2. Make sure that the ON/OFF switch is in the ON position.
3. Plug the tweezer cord and the patch cord into to their color coded outlets.
4. Touch the exposed metal parts of the tweezer to the aligator clip at the end of the patch cord.

The needle should then jump all the way to the right. If you purchased a foot pedal and have it plugged in during the test, you will need to touch the exposed metal parts while pressing down on the foot pedal. The machine is fully functional if the needle jumps to the right.

If you have any questions regarding to the Vector Hair Removal System, you can all  24/7 Support Line: 888-736-7417 or email: [email protected]. All emails will be answered within 48 hours.

Additional Information

Warranty One year
Country of Manufacture China

Product Authenticity Guaranteed - Fabove guarantees 100% authentic of all products we sell!

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register